E39 E38 E53 needle removal Main Menu
* Caution this is the hardest part of the job extreme care needed*
Tools : 1. Speedo, rev counter,fuel, temp use Gripper/pliers -blue tool in pics to lock and secure the motor shaft 2. Economy needle removal tool or oil temp needle on M5 E39- this tool makes light work of remving the eco gauge.
1. One tool will remove four needles - the blue gripper tool or similar tool in our photos Photo gallery here speed,rev,fuel,water temp. The tool will hold the motor shaft from the rear of the speedo. Other repairers use other tools eg here see this video
2. The special tool- economy needle tool will remove the economy gauge needle/(oil temp gauge in E39 M5). Buy it here
This sits on the needle after you remove the black round cap ( which you can prise off with a small flat screw driver by placing it under the rim of the black cap- place a business card under the needle first to protect the dial)
First you must lift off the black cap off the top of the eco needle using a small screwdriver flicking it on both sides to make it unclip > then place the tool over the needle and rotating the tool head. As you turn the tool head the pin will lower through the needle pushing down on the motor shaft -thus releasing the needle
Photo below: M5 2002 speedo with special eco/temp needle(m5) tool
Using the blue scissor gripper tool for the speedo needle, rev counter, fuel and water temp: -
|
|